Pick a PN16 weld-neck flange from DN15 to DN300, then change its outside diameter, bolt circle, thickness and length, the number of bolt holes and the raised face. The part and its production drawing are rebuilt in your browser on every change: a face view with the bolt pattern, a section with its diameters and lengths, an iso view and a title block. The sheet size and the scale follow the part. The drawing downloads as DXF and SVG.
The flange is modelled with OpenGeometry and drawn by a drawing engine written in Rust and compiled to WebAssembly. It makes the hidden-line views and the hatched section from the model, reads the diameters, lengths and bolt pattern off its geometry, and picks the sheet and the scale so the views and their dimensions fit. Part and drawing together take about 25 milliseconds; the DXF comes from the same engine.
← All demos